|
|
|
|
|
|
 |
|
| |
This ECU is a complete replacement solution for the original Ducati Desmo16 RR engine control unit.
It implements all the functions and security strategies given by the original one, and is supplied with the original maps and Ducshop custom maps which are completely configurable.
Heart of the ECU is the MPC5534 Power PC from Freescale, and with the 80Mhz system clock gua-rantee high calculation performances.
Complete management of ignition / injection parameters, and the automapping feature, available after purchase of a suitable lambda sensor, are the keys for maximum flexibility and performance.
On-board CAN and RS232 lines, provide a simple and standard way to connect the ECU to a data logger system or a common PC
A 3D Windows application, purposely developed for this unit, is designed for customize and monitor all the system parameters and the external sensors data.
The red box is fully anodized in aluminum material, and is simple and immediate to install into the original housing.
Major Features:
Individual cylinder injection mapping via 20 throttle settings and each 500 RPM
Dual maps switchable on the fly
Optional auto mapping with 3 A/F ratios per cylinder
Ignition mapping
Adjustable rev limiter (spark and fuel)
Adj. shift lights
Adj. electronic shift (per gear) time outs, delay ect..
Pit lane speed limiter
Launch control
Adj. pre-injection
Tire circumference settings (front and rear)
Pre-injection time
Water temp correction (spark and fuel)
Air temp correction (spark and fuel)
Altitude correction (spark and fuel)
Injection phase
TPS interpolation
Diagnostics recording with re-set
Password protection
Comes with USB cable and full software CD
Mechanical data:
Dimensions (BOX only) 128 x 95 x 22
BOX material Red anodized aluminum
Main Connectors 2 x 64 ways AMP
AUX Connector 12 vie AMP 040-174973
Weight 300g
Inputs
Analogic 10
Digital 10
Lambda sensor 1
Pick-up inductive / hall 1 + 1
Battery level 1
Wheel speed 2
Lambda sensor 2 (UEGO via CAN BUS)
Outputs
Injector Drivers 4
Coil Drivers 4
Fuel Pump 1
Fan 1
RPM 1
Warning Lamp 1
Light 1
Options
Electronic shift
Data acquisition
Auto-mapping lambda sensor
Communication
CAN Line (1Mbit/s) 1
RS232 Line 1
Electrical Data
Power Supply 8 - 18Vdc
Temperature Range -20 / +85°C
Software
Windows application MON226, with 3D maps viewer
Shipping Info:
USA and Canada Deliveries via UPS ground. For other countries or express shipping contact parts@ducshop.com
Payment Options:PayPal, Visa, Mastercard
|
|
|
