All Balls 18-3281 Rear Brake Caliper Rebuild Kit
All Balls 18-3281 Rear Brake Caliper Rebuild Kit
1 in stock
Browse product guides & manuals →
Couldn't load pickup availability
Special Order — Contact Ducshop
This selection is currently out of stock. Please call 770-424-8804 or email parts@ducshop.com to confirm availability and estimated shipping time before ordering.
Low stock, availability can change.
Only 1 remaining. These items can sell quickly and may be out of stock overnight.
Please call 770-424-8804 or email parts@ducshop.com to confirm current availability before purchasing.
All Balls 18-3281 application-specific brake caliper rebuild kit for the verified European motorcycle applications below. Match the exact model, year and front/rear caliper position before ordering.
- Manufacturer part number: 18-3281.
- Sold as one kit for one caliper. Order the required quantity if servicing multiple calipers.
- For the original-equipment caliper on the listed applications; aftermarket calipers require separate confirmation.
- Kit contents are specific to this part number; see the product image.
Kit contents
- Bolt Kit: 1.
- Boot: 3.
- Caliper Seal: 2.
- Snap Ring: 2.
- Washer: 2.
DUCSHOP Fitment & Installation Guide
| Make | Model | Years | Position |
|---|---|---|---|
| Husqvarna | FE 250 | 2018–2022 | Rear |
| Husqvarna | FE 350 | 2018–2021 | Rear |
| Husqvarna | FE 350s | 2020–2021 | Rear |
| Husqvarna | FE 450 | 2018–2021 | Rear |
| Husqvarna | FE 501 | 2018–2021 | Rear |
| Husqvarna | FE 501s | 2020–2021 | Rear |
| Husqvarna | FX 350 | 2018–2021 | Rear |
| Husqvarna | FX 450 | 2018–2021 | Rear |
| Husqvarna | TE 150 | 2018–2019 | Rear |
| Husqvarna | TE 150i | 2020–2021 | Rear |
| Husqvarna | TE 250 | 2018 | Rear |
| Husqvarna | TE 250i | 2018–2021 | Rear |
| Husqvarna | TE 300 | 2018 | Rear |
| Husqvarna | TE 300i | 2018–2021 | Rear |
| Husqvarna | TE 300i Jarvis Edition | 2020 | Rear |
| Husqvarna | TX 300 | 2018–2019 | Rear |
| Husqvarna | TX 300i | 2020–2021 | Rear |
Fitment is based on the stock motorcycle and the stated manufacturer part number. Confirm the model year, exact model designation and caliper position. Modifications or aftermarket brake components may change compatibility.
Installation & brake-service guidance
Brake service should be performed by a qualified technician following the motorcycle service manual. Inspect the caliper bore, pistons, slider pins and seal grooves. Replace damaged parts as required by the motorcycle service manual; do not assume that caliper pistons are included. Keep components clean and use only the specified compatible brake fluid and service materials. Follow the correct bleeding procedure where the hydraulic system is opened, verify lever/pedal pressure and inspect for leaks before riding.
Need help confirming fitment? Call 770-424-8804 or email parts@ducshop.com.
Ducshop internal product code: WP
