Fire Power CTZ7S-BS AGM Motorcycle Battery — Activation Required
Fire Power CTZ7S-BS AGM Motorcycle Battery — Activation Required
Browse product guides & manuals →
Couldn't load pickup availability
Special Order — Contact Ducshop
This selection is currently out of stock. Please call 770-424-8804 or email parts@ducshop.com to confirm availability and estimated shipping time before ordering.
Fire Power CTZ7S-BS 12V AGM motorcycle battery for the verified European applications below.
Activation required before use. Supplied with the pre-measured electrolyte pack. A qualified battery technician must fill, seal and charge this battery following the supplied Fire Power instructions before installation.
- 12V maintenance-free AGM construction after correct activation and sealing.
- Requires initial electrolyte activation and charging.
- Must be mounted upright as specified by the WP application chart.
- Manufacturer part: CTZ7S-BS.
- Sold individually.
DUCSHOP Fitment & Installation Guide
Selected European applications verified directly in the Western Power Sports 2026 Offroad application chart (pages 637, 641):
| Motorcycle | Years |
|---|---|
| Beta RR-S 125 4T Enduro / Motard | 2019–2026 |
| Beta RR 350 4T Racing | 2020 |
| Beta RR 390 4T Enduro EFI Racing | 2018 |
| KTM 530 EXC / XC-W | 2005–2012 |
Confirm your exact model year, original battery, terminal polarity, cable reach and tray clearance before ordering. These entries are taken directly from the WP supplier application chart, not inferred from dimensions or a generic cross-reference.
Activation must be completed by a qualified battery technician in accordance with the supplied Fire Power instructions. Use only the supplied pre-measured electrolyte pack; follow the specified filling, resting, sealing and initial charging procedure. Wear the specified protective equipment and keep electrolyte away from skin and eyes. Once activated and sealed, do not reopen or add water or electrolyte. Use a suitable 12V AGM charger. Install upright, confirm polarity and secure mounting. Disconnect the negative cable first for removal and reconnect it last during installation.
For fit assistance, call 770-424-8804 or email parts@ducshop.com.
Ground shipping within the contiguous United States.
Ducshop internal product code: WP.
