Yuasa YB9-B Conventional Motorcycle Battery — Acid Sold Separately
Yuasa YB9-B Conventional Motorcycle Battery — Acid Sold Separately
Browse product guides & manuals →
Couldn't load pickup availability
Special Order — Contact Ducshop
This selection is currently out of stock. Please call 770-424-8804 or email parts@ducshop.com to confirm availability and estimated shipping time before ordering.
Yuasa YB9-B 12V conventional lead-acid battery for the verified European motorcycle and scooter applications below.
Battery acid is sold separately and is not included. Initial filling and charging are required before use.
- 9 Ah at the 10-hour rate.
- Battery case: 5 5/16 × 3 × 5 1/2 inches (L × W × H).
- Manufacturer part: YUAM229BY.
- Serviceable conventional battery; periodic electrolyte-level checks required.
DUCSHOP Fitment & Installation Guide
Selected European applications for the YB9-B battery reference:
| Motorcycle | Years |
|---|---|
| Aprilia Classic 125 | 1995–1999 |
| Aprilia AF1 / Futura 125 | 1990–1992 |
| Benelli Jarno 125 — electric start | Year confirmation required |
| Cagiva Mito 125 | 1990–1997 |
| Gilera Apache 125 — electric start | Year confirmation required |
| Piaggio PX150E | Year confirmation required |
| Triumph Bonneville / Tiger 750 | 1959–1983 |
Where years are not specified in the manufacturer application guide, contact Ducshop to confirm your exact model year and starting system before ordering. Do not treat an undated entry as universal fitment.
Confirm the original battery reference, model year, tray dimensions, terminal polarity and cable reach before ordering. Check your motorcycle manual for any model-specific battery requirements.
Supplied dry: battery acid is sold separately and is not included. Have a qualified technician activate the battery with the correct electrolyte and follow the supplied filling, resting and initial-charging instructions. Wear eye protection and acid-resistant gloves. Use a suitable 12V charger for conventional lead-acid batteries. Do not install until correctly activated and charged.
Fit the battery securely. Disconnect the negative cable first during removal; reconnect it last during installation. Keep terminals protected from short circuits. Mount upright and route the vent tube safely, clear of heat and moving parts; keep it unobstructed. Inspect electrolyte levels as directed by Yuasa and use distilled water for routine topping up after activation.
For fit assistance, call 770-424-8804 or email parts@ducshop.com.
Ground shipping within the contiguous United States.
Ducshop internal product code: WP.
